-
Design And Implement A Radio Controlled Car Lock With 5-min Ignition Deactivation Facility
CHAPTER ONE -- [Total Page(s) 2]
Page 2 of 2
-
-
-
1.3. Aims and Objectives of the Study
i.
The aim of this project is to design and implement a radio controlled
car lock with 5-min ignition deactivation facility capable of
discontinuing the movement/motion of a vehicle snatched at Gunpoint
using remote control.
ii. The objectives of this study are;
to develop a prototype system that can be used to lock and deactivate an
automobile snatched at gunpoint using RF remote control.
iii. To develop an automotive device which can be powered using car battery.
iv. To develop a system which can use Rf remote to lock a vehicle.
v. To develop a module which can switch the ignition of vehicle using the car doors
1.4. Significance of the Project
This
project work signifies a lot in computer, electrical and electronic
engineering. It is used in deactivating vehicles a snatched at gunpoint,
also has many relevance in telecom. A project of this nature will be
very vital in security/surveillance. This design can be modified to
function as an RF remote controlled electronic appliance – this will
make it have ground in domestic and industrial settings. The project can
be used in office and home locks. This device, if funded and developed,
will sell like a German burger.
1.5. Specification
This
project work is a prototype of the real – life system which would be
used in a vehicle. This device would be able to lock the car ignition
system by pressing an Rf remote control at a maximum range of 100
meters. This system would be able to deactivate the ignition system of
the vehicle after a period of 5 minutes any of the doors is opened and
closed. This device can only lock and deactivate the vehicle but cannot
indicate or show the location of the vehicle. It only makes the car
thieves stranded.
CHAPTER ONE -- [Total Page(s) 2]
Page 2 of 2
-
-
ABSRACT - [ Total Page(s): 1 ]This project deals with the design and implementation of a radio controlled car lock with 5-minutes ignition deactivation facility capable of locking a vehicle using a remote control from a distance. The system is designed in two functional units; the transmitter which is an RF handheld remote control, and the receiver units. The receiver unit is realized in several modules. A tuned radio frequency receiver (TRF) output is used to trigger a bistable multivibrator configured using CD 4013 whose o ... Continue reading---
