-
The Design And Construction Of 2kva Inverter
-
-
-
CHAPTER FIVE
CONCLUSION AND RECOMMENDATION
5.1 CONCLUSION
The basic objective of the project that were realized include the guarantee of the supply during the absence power from service authority, the elimination of power surges and energy management induction of bill amazed from fuel cost and generator maintenance. The inverter is more environmentally friendly, easier to operate and required very little maintenance compared to a generator.
Through the project is efficient and reliable, it has some limitation;
i. It lacks transfers speed to automatically switch over during power outage.
ii. When operating on full load, the battery trends to drain off faster.
iii. It commit supply loads, greater than 1600VA
5.2 RECOMMENDATION
After the completion of the project work, the following recommendations are necessary so to achieve a high output and efficient inverter.
i. A more simplified schematic diagram should be adopted in order to reduce interconnection, thereby easing troubleshooting
ii. Further research should be done on the area of the energy source like windmill and solar
Various modification of inverter could be recommended for uses in homes and offices such modification could be with charger.
Also, the project really exposed me to power electronics and practical electronics generally which is one of the major challenges, I encounter in my field now and in future, therefore I recommend the student should be more exposed into practical aspect of their various field of studies.
-
-
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTThis project presents the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices/homes in the absence of power supply from National Supply Authority.It is designed in such a way that it will take up to 12V DC from battery and inverts it to an output of 220V, 50Hz AC. It makes no noise during operation and not hazardous like carbon monoxide is generated to the surrounding. This is the feature makes it safe to used anywhere whe ... Continue reading---
TABLE OF CONTENTS - [ Total Page(s): 2 ]TABLE OF CONTENTTITLE PAGE CERTIFICATION DEDICATION ACKNOWLEDGMENTABSTRACT TABLE OF CONTENT CHAPTER ONEINTRODUCTION1.1 BACKGROUND OF THE STUDY 1.2 PROBLEM OF STATEMENT 1.3 AIM AND OBJECTIVE1.4 SCOPE OF THE PROJECT 1.5 METHODOLOGY1.6 MOTIVATION 1.7 LIMITATION OF THE PROJECTCHAPTER TWOLITERATURE REVIEW2.0 INVERTER 2.1 HISTORY OF INVERTER2.2.1 GENERAL FEATURES OF THE PROTECT2.2.1 POWER SUPPLY UNIT2.2.2 CHANGENG OVER UNIT 2.2.3 SWITCHING UNIT2.2.4 UNDER AND OV ... Continue reading---
CHAPTER ONE - [ Total Page(s): 2 ]CHAPTER ONEINTRODUCTION1.2 Background of the Study An inverter is an electronics device or circuitry that changes direct current (D.C) to Alternating current [AC]. The device make used of an in–built automatic circuit to achieve a complete automation of the entire system. The input voltage, output voltage, frequency and overall power handling depend on the design of a specific device or circuitry. An inverter is very important element that cannot be neglected in this Country as it i ... Continue reading---
CHAPTER TWO - [ Total Page(s): 2 ]CHAPTER TWOLITERATURE REVIEW2.0 INVERTER An enabling technology, power electronics does it job with intelligence, precision and efficiency. It used the smartness of advanced control technology with the efficient conversion of electric power into the precise from required to control a function or process. In a industrial and commercial products, it is gaining ground mostly visible among inverters which converts direct current (DC) into a single or poly phase AC voltage at a desire aptitu ... Continue reading---
CHAPTER THREE - [ Total Page(s): 9 ]The capacitance is thus, the number of coulumbs stored per unit voltage across the capacitor i.e.C= Where C is the capacitance in farads Q is the charge in coulumb V is the voltage across the capacitor in voltsFig 3..2 capacitor 3.1.3 DIODE A diode is a semi-conductor device which allow flowing of current in one direction. Diode is a device which can be either forward or reversed biased. It has a low resistance and is unidirectional. Diodes are va ... Continue reading---
CHAPTER FOUR - [ Total Page(s): 5 ]Ns = 3520/12=293 turnsTherefore Es = 240vNs/Np = Es/EpNs = (Np Es)/EpNs = 240 x 16 12Ns = 3840 = 320 turns 124.1.3 FREQUENCY DIVISION COUNTER This unit is made up of integrated circuit, it serve as a counter to divide the 100Hz signal generated into two equal part i.e 50Hz (Nigeria Standard), these divided frequency of 50Hz each is in the anti-phase and therefore are each alternating fed to the base of the MOSFET in the inverting stage.4.1.4 FREQUENCY UNIT The purpose of this proj ... Continue reading---
REFRENCES - [ Total Page(s): 1 ]REFERENCESBEDOFORD,B.D, et al. Principle of inverter circuit New York, John Willey, (1964). David L.A. Modern UPS Servicing, Marc Dowell publishers, London, (22nd Edition) 2001.Manahar Lofia, Modern Digital Inverter-Introduction Servicing and Troubleshooting, (23rd edition)1996.OYETUNJI TOBI,S. (2015), construction of 2KVA inverter Electrical/Electronic Engineering Project Power Option HND II Finial Year, Unpublished.Tharaja B.L et al, A Textbook of Electrical Technology, S. Chand & Company Lt ... Continue reading---
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTThis project presents the design and construction of a DC to AC inverter system. It is designed to meet up with the power demand in the offices/homes in the absence of power supply from National Supply Authority.It is designed in such a way that it will take up to 12V DC from battery and inverts it to an output of 220V, 50Hz AC. It makes no noise during operation and not hazardous like carbon monoxide is generated to the surrounding. This is the feature makes it safe to used anywhere whe ... Continue reading---
CHAPTER FIVE -- [Total Page(s) 1]
Page 1 of 1
CHAPTER FIVE -- [Total Page(s) 1]
Page 1 of 1