-
Design And Construction Of A Single Phase Auto Transformer Of Rating Ikva 240v/110 80 12v 6v
-
-
-
This project work-up deals on the design and construction of a single phase step down nations fermor, with raking IKVA, 240V/11OV, 80V 12U, 6V. It is a multi-circuit transformer that has one input as the primary and tappins to produce the output (secondary). It is considered as a single coil in series with the supply and a common coil to the head. It is experimentally done using flat metal shocks of cast steel to form the “E†and “I†shaped laminations and coils of various turns.
Not much progress has been made by those who were in the field in the production of a much circuit auto-transformer. While working this project, we got information from some textbooks on auto-transformer and some expert in the field.
However, the write up goes beyond the perspectives of an ordinary layman’s belief that the theory behind the construction of an auto-transformer cannot be achieved practically by Nigerian Engineers in this country. Every aspect of the auto-transformer.
-
-
-
CHAPTER ONE - [ Total Page(s): 3 ]Primary
Winding: The primary winding of a transformer is the winding that is
directly connected to the over is the winding that is directly connected
to the supply.Secondary Winding: This is the winding that is directly connected to the head.Tappings:
Tappings refers to the connections which are usually made successively
in the winding of a transformer especially in auto transformer.Step up: When the primary voltage is lower than the secondary voltage, the transformer is caved a step u ... Continue reading---
-
CHAPTER ONE - [ Total Page(s): 3 ]Primary
Winding: The primary winding of a transformer is the winding that is
directly connected to the over is the winding that is directly connected
to the supply.Secondary Winding: This is the winding that is directly connected to the head.Tappings:
Tappings refers to the connections which are usually made successively
in the winding of a transformer especially in auto transformer.Step up: When the primary voltage is lower than the secondary voltage, the transformer is caved a step u ... Continue reading---
ABSRACT -- [Total Page(s) 1]
Page 1 of 1
ABSRACT -- [Total Page(s) 1]
Page 1 of 1