-
Construction Of Automatic Water Level Controller For Both Overhead And Underground Tanks
CHAPTER ONE -- [Total Page(s) 2]
Page 2 of 2
-
-
-
1.2 JUSTIFICATION
Automatic water level monitor came into existence
because of human error and inconsistence that is associated with
manually operated water pumping machine. This is because it takes time
for individual who is manually operating the water pump to turn off the
pumping machine and this may cause water spillage and at times the
individual might not know that the water level has drop so low until the
tank is completely empty. This was the problem that leads to the
development of the ideal of an automatic water level control and
automatic pump short down.
1.3 SCOPE OF THE PROJECT
The project
was design to automatically control the pump which ensures constant
reserve of water in the reservoir. The scope of the design was keep
concise and simple to in other not to introduce unnecessary complexities
and render it generally uncomfortable. The system does not have
attached complex peripheral device which though impossible for the
detail printable information has been excluded for reasons of
affordability material of low range and less accurate performances as
opposed to a
well built automatic water pump was use d to achieve
this aim, the automatic water level controller detect and control the
water in the tank
1.4 CONSTRAINS
The biggest setback experience
during the course of this project is difficulties in finding the design
of the project, secondly sourcing of material and component I used for
the project were difficult to find like pump and buffer for programming
1.5 LIMITATIONS OF THE PROJECT
It
is significant to know that this design is limited to 12v, 5amps
electric pump and cannot be use to control industrial water pump above 5
amps
BLOCK DIAGRAM OVERVIEW
This project report writing is written is design in such a way that each chapter is related to the next as shown below
1.6 PROJECT RESPORT ORGANISATION
The
organization of this project report is well detailed and vast in its
coverage it covers all the activities encountered during the research
work. The first chapter of this work took care of the introduction, aims
and objective, scope, Justification and project report organization.
Chapter two highlight on literature review chapter three highlight on
description of system and some of the component used were emphasized
chapter four highlight on the system design and implementation,
construction, testing and packaging of the pump. Chapter five is all
about the conclusions problem encountered recommendation and cost of the
project.
CHAPTER ONE -- [Total Page(s) 2]
Page 2 of 2
-
-
ABSRACT - [ Total Page(s): 1 ]Automatic water level controller for both overhead and underground tank is designed to monitor the level of water in a tank. It displays the level of water and when it is at the lowest level; a pump is activated automatically to refill the tank. When the tank is filled to its maximum capacity, the pump is automatically de-energized. Several circuits are put together to ensure proper working of this design, and the block diagram includes the supply unit, the micro-processor unit, the sensor unit, ... Continue reading---
