-
Design And Construction Of 5kva Inverter
CHAPTER ONE -- [Total Page(s) 3]
Page 3 of 3
-
-
-
1.3 ORGANZATION OF THE PROJECT
The 5KVA, 220-240v, 50Hz inverter is constructed using the following components:
Resistors,
Capacitors,
Semiconductor diode
Transistors (MOSFET),
Integrated circuits (ICs)
Transformer
The MOFSET is the major component used in the inversion of Direct Current (D.C) to Alternating Current (A.C).
This 5KVA inverter project report is arranged in the following sequence:
-
Chapter one discuses a general introduction to the project. It gives us
a background of the project. Helping us to see the relevance of this
inverter project in the world today. It also discusses the objectives of
an inverter as well as its type
- Chapter two discusses the
various literary review opinions and ideas that various authorities in
the world of electronics, discusses about the inverter system.
- Chapter three discuses a general description or the various components used in the construction of this project.
- Chapter four discuses the construction procedure.
- Chapter five shows how the project was packaged and its conclusion.
SUMMARY
In
this chapter, an inverter has been described and introduced. The
relevance of an inverter system as well as its objectives was also shown
in this chapter one.
CHAPTER ONE -- [Total Page(s) 3]
Page 3 of 3
-
-
ABSRACT - [ Total Page(s): 1 ]This inverter is designed to convert ac power from higher capacity dc batteries to A.C voltage (power) for systems that use ac only. It uses 24v battery D.C times 2, which is converted by the MOSFET to A.C. it is used I.C. with the model number SG3525 where the four MOSFET is connected to it. It consists winding which enable to determine the number of wattage. The inverter consist of four section (i) supply unity (i) Triggering or Switching unit (ii) Buffer stage (iv) step-up trans ... Continue reading---
