-
Automatic Pump Control With Water Level Monitor And Digital Display
CHAPTER ONE -- [Total Page(s) 2]
Page 1 of 2
-
-
-
CHAPTER ONE
INTRODUCTION
1.1 Background of the Study
The
project “automatic water level control with an automatic pump control
system†is design to monitor the level of liquid in the tank. The system
has an automatic pumping system attached to it so as to refill the tank
once the liquid gets to the lower threshold, while offing the pump once
the liquid gets to the higher threshold. Sustainability of available
water resource in many reason of the word is now a dominant issue. This
problem is quietly related to poor water allocation, inefficient use,
and lack of adequate and integrated water management. Water is commonly
used for agriculture, industry, and domestic consumption. Therefore,
efficient use and water monitoring are potential constraint for home or
office water management system. Moreover, the common method of level
control for home appliance is simply to start the feed pump at a low
level and allow it to run until a higher water level is reached in the
water tank. This water level control, controls monitor and maintain the
water level in the overhead tank and ensures the continuous flow of
water round the clock without the stress of going to switch the pump ON
or OFF thereby saving time, energy, water, and 13 prevent the pump from
overworking Besides this, liquid level control systems are widely used
for monitoring of liquid levels in reservoirs, silos. Proper monitoring
is needed to ensure water sustainability is actually being reached with
disbursement linked to sensing and automation, such programmatic
approach entails microcontroller based automated water level sensing and
controlling or using 555 timer IC.
1.2 Statement of the Problem
Sustainability
of available water resource in many reason of the word is now a
dominant issue. This problem is quietly related to poor water
allocation, inefficient use, and lack of adequate and integrated water
management. Water is commonly used for agriculture, industry, and
domestic consumption. Therefore, efficient use and water monitoring are
potential constraint for home or office water management system.
Moreover, the common method of level control for home appliance is
simply to start the feed pump at a low level and allow it to run until a
higher water level is reached in the water tank. This water level
control, controls monitor and maintain the water level in the overhead
tank and ensures the continuous flow of water round the clock without
the stress of going to switch the pump ON or OFF thereby saving time,
energy, water, and prevent the pump from overworking Besides this,
liquid level control systems are widely used for monitoring of liquid
levels in reservoirs, silos.
CHAPTER ONE -- [Total Page(s) 2]
Page 1 of 2
-
-
ABSRACT - [ Total Page(s): 1 ]Automatic water level controller for both overhead and underground tank is designed to monitor the level of water in a tank. It displays the level of water and when it is at the lowest level; a pump is activated automatically to refill the tank. When the tank is filled to its maximum capacity, the pump is automatically de-energized. Several circuits are put together to ensure proper working of this design, and the block diagram includes the supply unit, the micro-processor unit, the sensor unit, ... Continue reading---
