Design And Implementation Of Gas Detection System Using Gsm Network

1.3 Aims And Objective

The aim and objectives of this project is to design and implementation of gas detection system using GSM network.

 Other objectives of the project are as follows:

1. To build a potable and lower cost gas detector to improve the feasibility of smart detection networks for health and safety.

2. Unlike a traditional gas leakage alarm system which only senses a leakage and sounds an alarm, the idea and objective of our solution is to call the user via GSM when even gas leakage occurs.

3. The user can pick the gas detector alert call to hear the conversation in the location.

1.4 Scope of work

The gas detection system uses GSM network and detects LPG from concentration of 200 parts per million to 10,000 parts per million in an area using microcontroller and MQ6 sensor.

The gas detector is a battery operated device considered for detection of various gases within an area usually as part of a safety system/risk control.

1.5 Significance of the Project

This project can be used to detect gas leakages at home, in a car, storage tank environment or in a service station. It can be easily implemented to industrial level by upgrading its ranges. The implementation of this project is important in every home, office and industries because there are many gases that can be harmful to organic life, such as humans or animals. This project helps people to upgrade their safety standards, comply statutory even though it has small sensitivity to detect alcohol, it can be used as liquor tester.  The project has excellent sensitivity combined with a quick response time.  It’s most important and basic function is to prevent accidents and protect life and property from disaster.  It provides along lasting safety means for detecting the leakage of gas into the area of an appliance when the appliance is in a shutdown condition or not in operation. It provide a novel gas detection and monitoring system which is economical to manufacture and which may be readily installed in conventional trailers, boats or the like which are normally dependent upon a stored supply of pressurized gas.

1.6 Overview of the Write-Up

This project report is written in such a way that each chapter is related to the next as shown in the block diagram below. 

The organization of the project report is well detailed and vast in its coverage. It covers all the activities encountered during the research and construction work.