-
Construction Of Welding Machine
-
-
-
In summary, a transformer is a device that:
i. Transfer electric power from one circuit to another
ii. It can rise or lower the level of voltage or current (when voltage increase, current decrease and vice versa because P= V x 1, and power is same) in an AC circuit.
iii. It can be used to prevent DC from passing from one circuit to another
iv. When the two electric circuit are in mutual. Inductive of each other
Hence, if N1 and N2 be the number of turns on panel S respectively.
When the secondary is an open circuit, it terminal voltage is the same as the induced e.m.f the primary current is then become small, so that the applied voltage V, is practically equal and opposite to the e.m.f induced in P hence.
Since the full-load efficiency of a transformer is nearly 100% l1V1 x primary power factor x 12V2 secondary factor . But the primary and secondary power factor at full load area early equal
-
-
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACT COMING SOON ... Continue reading---
CHAPTER ONE - [ Total Page(s): 2 ]CHAPTER ONE1.0 INTRODUCTIONIn the past with the necessary of metals it always seems impossible to join two metals together with grooving riveting, this idea leads to alternative of finding a lasting solution to the problem. This brought about the idea of a welding machine with a well laminated core and coil wound together to form a high rated transformer which is immersed in a can of oil.Welding is the most economical and efficient way to join metals permanently. It is the only way of join ... Continue reading---
CHAPTER TWO - [ Total Page(s): 3 ]ii. OXIDIZING FLAMEOxidizing welding flame are produced hen slightly more than one volume of oxygen is mixed with one volume of acetylene. To obtained this type of flame, the flow of oxygen is then increased until the inner cone is shortened to about one tenth of it original length when the flame is properly adjusted, the inner cone is pointed and slightly purple. An oxidizing flame can also be recognized by it distinct hissing sound. The temperature of this flame is approximately 6300oF ( ... Continue reading---
CHAPTER THREE - [ Total Page(s): 4 ]CHAPTER THREE3.0 GENERAL DESCRIPTION AND ITS WORKING PRINCIPLERegarding the design and fabrication of this project several information were gathered through consultation of previous journals text books and internet.Definition: “welding is the process of joining together two pieces of metal so that bonding take place at their original boundary surface s. when two parts to be joined are melted together, heat or pressure or both is applied and with or without added metal for formation o ... Continue reading---
CHAPTER FOUR - [ Total Page(s): 4 ]Where;K = constant (Boltzman constant in joules / kelvin)A= 200m x 4 = 800mmT2 = 3500CT1 = 3150CX = 50mmQ = k x 800mm 350 – 3150C 50mm Where K =8.617 x 10-5 J/kQ = 8.673 x 10-5 x 800mm (135 50mmQ =62044.46 J/K 4.1 WINDING DESIGNThe basic of winding is to have number of turns being wounded around an appropriate point of the core. Winding design in transformer construction must be done perfectly and accura ... Continue reading---
CHAPTER SIX - [ Total Page(s): 1 ]CHAPTER SIX6.0. CONCLUSION AND RECOMMENDATION6.1 CONCLUSION The project is a form of providing student with appreciable skills p4actically designed to expose or equip them with real working operation of machine and how they are being constructed and a better understanding of one’s own career goals and for the progress of the nation.The project seemed easy and simple but later on turn to be useful and interesting project for Engineering students. With all the proble ... Continue reading---
REFRENCES - [ Total Page(s): 1 ]REFERENCESFlood CR (1981) “Fabrication of welding and joining process†1st Edition, Butterworth and Co publisher limited London, P.P 21 – 25, 28 36- 37 and 39.Google: http://weldguru.com/welding-flamesFlood CR and parkin N. (1974) “craft practice “ 1st Edition pergamon press limited, New YorkDavies A.C (1984) “Welding science and technology†8th edition Cambridge Universities press. London Pg-42B.L. and A.K.Therage (1994 Textbook of Electri ... Continue reading---
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACT COMING SOON ... Continue reading---