-
Fabrication Of Electrical Pop Corn Machine
-
-
-
CHAPTER ONE
INTRODUCTION
1.1 The Background of The Project
The basic aim of this project is to improve the quality and standard of production of a pop-corn machine and how its producing the popcorn.
Therefore, it act or promote and improve production rate and limit the frying time, as much as it could performed and lastly production it in a sanitary condition.
The design and construction of pop corn machine is brought from the perspective of its availability in market.
Also this project is also a means of promoting the diversity in utilization to suit different taste.
1.2 This is the past related work that has been carried out before this project and which are relevant to this project.
Therefore, for the past few years, several processes have been proposed for producing pop-corn machine in commercial use other than local ones i.e (Electrically popcorn machine and natural fire of heat pop corn machine).
1.3 Specification of Problem
1.3.1 Requirement of the Design
The design is expected to achieve the following objective:-
Production of pop corn in long scale
Increase the efficiency of producing pop corn
Moderate the rotation of the stirrer by using right motor
To reduce the heat that will be lost by logging the out put
To regulate the voltage used to produce popcorn
The presence of bulb to enhance production at night
1.3.2 Condition For Use
The machine might be used under elevated temperature
The machine should be store after used in a clean and dry place
Routines clean would be necessary to avoid rusting of the pot
The motor should be service from time to time to maintain its efficiency
1.3.3 Characteristic
The machine should not be heavy, the machine should not be big to enhance effecting stirring. The distance between the pots should not be too large to reduce heat loss. Aluminum should be used for both the frame profile and the construction of the stirrer. Glass should be used due to the case because of the transparency.
1.3.4 Appearance
The product should have a glistening appearance which can attract the prospective consumer of the pop corn.
Reliability and life
The expected useful life in normal circumstances should be less than 10 years.
LIMITATION
There was no conveyor that should remove the popcorn from the hot pot
There was no time to indicate when the corn is fully popped
There was no thermostat to regulate the temperature of the system
There was nothing like lagging to trap some of the heat
-
-
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTIron pop corn machine has being a machine that is fabricated to produce a large and reasonable amount of pop corn with a limited cost and of fast rate it is economical as it is known to be for average Nigerians and also as appetizer to meet the demand of the consumer, invention of this machine at very economical rate, its source of heat is an electric burner, with a very moderate height and a detachable aluminum pot and container to collect the pop corn, the fabrication of the pop corn ... Continue reading---
TABLE OF CONTENTS - [ Total Page(s): 1 ]TABLE OF CONTENTS Title Page Certification Dedication Acknowledgement Abstract Table of contents CHAPTER ONEINTRODUCTION 1.1 The Background of the Project 1.2 Literature Review 1.3 Specification of Problems 1.4 Requirement of Design 1.5 Condition for Use 1.6 Characteristics 1.7 Appearance CHAPTER TWO2.1 Description of component part 2.2 Body frame work 2.3 Material needed fo ... Continue reading---
CHAPTER TWO - [ Total Page(s): 2 ]CHAPTER TWODESCRIPTION OF THE COMPONENT PARTS AND WORKING PRINCIPLE2.1 Description of Components Parts This comprises of the main body itself i.e the part and the equipment used in constructing the pop corn machine. Four legs -: this serve as lifting mechanism Sitting portion of the pot Aluminium pot-: this is the uppermost of the pot that is accommodating the com-steering Element:this is caled electric burner. Support pipe, steering pot and the stirrer 2.2 ... Continue reading---
CHAPTER THREE - [ Total Page(s): 1 ]CHAPTER THREE3.1 Assembly Assembly is a way of fussing or coupling split parts together to become whole. Assembly procedure of this project goes thus: - After work has been completed on the source of heat supply (electric burner). The aluminum pot, the pot was designed on where to sit which is bolted i.e couple together with the electric burner for its operation. The means of assembling by bolting or riveting makes it more turn to both pot and sources of heat. The container of ... Continue reading---
CHAPTER FOUR - [ Total Page(s): 1 ]CHAPTER FOUR 4.1 PrecautionsAccident can be defined as an unexpected, unplanned and unpredicted event, which could cause loss of life, damage of properties and stoppage of work Safety can also be defined as freedom from accident. The following precaution are put in place when operating the machine. Touching of hot pot during processing is not advisable Line wire must not be touched with unprotected hands. Broken glasses and frame should be properly disposed. 4.2 ... Continue reading---
CHAPTER FIVE - [ Total Page(s): 1 ]CHAPTER FIVECONCLUSION AND RECOMMENDATIONS5.1 Conclusion After testing the machine, we discovered that we are able to pop higher amount of popped coin due to the fact that pot is bigger than the previous ones constructed. Stirrer touches all the botton part of the pot A detachable container is constructed so as to reduce the wastage of pop-corn when transferring from pot to the containers. Also my conclusions give me the room for production of high demand of pop-corn ... Continue reading---
REFRENCES - [ Total Page(s): 1 ]REFERENCES Abdul Qadir, B.L (2010) strength at materials “I†Edition, Published by SMS published and printing enterprises, Ilorin page1-20, page 37/38.(P.N OKEKE and M.W Anyakqwha (1987&1989), Senior Secondary School Physics, Revised Edition, Macmillan Education LTD, London and Basingstoke, page 17.R.A Higgins, (1994) “Properties of engineering materials†Second Edition, Edward Arnold, a division of Hodder Headline PLC, 338 Euston Road, London, page 378. ... Continue reading---
-
ABSRACT - [ Total Page(s): 1 ]ABSTRACTIron pop corn machine has being a machine that is fabricated to produce a large and reasonable amount of pop corn with a limited cost and of fast rate it is economical as it is known to be for average Nigerians and also as appetizer to meet the demand of the consumer, invention of this machine at very economical rate, its source of heat is an electric burner, with a very moderate height and a detachable aluminum pot and container to collect the pop corn, the fabrication of the pop corn ... Continue reading---
CHAPTER ONE -- [Total Page(s) 1]
Page 1 of 1
CHAPTER ONE -- [Total Page(s) 1]
Page 1 of 1